Adjustable mainsheet bridle seen exiting the sidetank on World Champion GBR4004 - the boat of World Champions Graham Vials & Chris Turner at the 2016 Dinghy Show

Innovative twin jib track system, with one track mounted inboard, on GBR4073 at the 2020 dinghy show - View 4

Wire loops on boom to hold manually-launched spinnaker pole when not in use

Spinnaker poles pulled-back alongside the boom by shockcord on Bill Chard's boat at the 2019 Dinghy Show

Mainsheet led along underside of boom in fabric sleeve

Lead corrector weights attached to the inside of the console on Bill Chard's boat at the 2019 Dinghy Show. Kicker line can also be seen

Mast base area on GBR4078 at the 2020 Dinghy Show

Conventional twin jibtrack arrangement, where the jib car has to physically moved from one track to the other - note that one end of each track is replaced with a removable pin to allow this

Console with only single-ended control lines on GBR 4021 - the boat of World Champions Steve Goacher and Tim Harper at the 2018 Dinghy Show

Mast-mounted twin pole launcher on Bill Chard's boat at the 2019 Dinghy Show

Innovative twin jib track system, with one track mounted inboard, on GBR4073 at the 2020 dinghy show - View 1

Innovative twin jib track system, with one track mounted inboard, on GBR4073 at the 2020 dinghy show - View 7

Another view of the upside-down cleat on main jammer on Charles Apthorpe's boat

Access hole in Ovington jib cleat base

Cockpit floor area on GBR2002 at the 2016 Dinghy Show

Double swivel jammer (kicker / mainsheet) on the aft-end of the console on Bill Chard's boat at the 2019 Dinghy Show

Arrangement to prevent mainsheet catching on transom corner during gybes - seen on Justin Waples' boat at the 2015 dinghy show

Innovative twin jib track system, with one track mounted inboard, on GBR4073 at the 2020 dinghy show - View 6

Another view of the spinnaker guys being led-away to a purchase system on Bill Chard's boat at the 2019 Dinghy Show

Alternative style (wider, flat-top) console on an unknown boat